Locating the connectors on the rear
Removing the cover
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
4. Press the cover-release button and slide the cover to the rear to remove.
1
Power connector
2
Mouse connector
3
Keyboard connector
4
USB connectors
5
Serial connector
6
Parallel connector
7
VGA monitor connector
Important
Read Chapter 2, "Safety information," on page 5 and "Handling electrostatic
discharge-sensitive devices" on page 8 before removing the cover.
from the drives, and turn off all attached devices and the computer.
input/output (I/O) cables, and any other cables that are connected to the
computer.
Chapter 10. Replacing FRUs (Types 8084, 8085, 8147, 8148, and 8179
8
USB connectors
9
Ethernet connector
10
Microphone connector
11
Audio line out connector
12
Audio line in connector
13
AGP slot (some models)
14
PCI slots
121