Locating connectors on the rear
Removing the cover
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
4. Press the buttons on the sides of the computer and pivot the rear of the cover
106
Hardware Maintenance Manual
1
Power connector
2
Mouse connector
3
Parallel connector
4
Ethernet connector
5
Audio line in connector
6
PCI slots
7
AGP slot (some models)
Important
Read Chapter 2, "Safety information," on page 5 and "Handling electrostatic
discharge-sensitive devices" on page 8 before removing the cover.
from the drives, and turn off all attached devices and the computer.
input/output (I/O) cables, and any other cables that are connected to the
computer.
up and off of the computer.
8
Audio line out connector
9
Microphone connector
10
USB connectors
11
VGA monitor connector
12
Serial connector
13
USB connectors
14
Keyboard connector