Flash Time Setting; 3System Return To Default Setting; Enable/Disable C.o. Lines; Enable All C.o. Lines - C-Tel CPS-Z User Manual

3.2.2 Flash Time Setting

Format: 00F #
F=1 ---------0.8s
F=2 ---------1.0s
F=3 ---------1.2s
F=4 ---------1.5s
F=5 ---------1.8s
Explanation: F means the flash time.
Description: For active the hold and divert operating use.
In default setting: F=2 (1.0s)
Example: Set the flash time to 1.2S

3.2.3System Return to Default Setting

Format: 0000 #
Description: The system will restart with the default factory setting.
The command has no effect on the status of enabling/disabling C.O. line.

3.3 Enable/Disable C.O. Lines

You must use these commands according to the actual trunk lines before using this
product!!! If you don't enable any C.O. line, the system will consider there is no C.O. line and
doesn't auto detect C.O. line!!!

3.3.1 Enable All C.O. Lines

Format: 0600#
Description: Enable all C.O. lines
8