Auto-Attendant Mode No Answer Process (Except 108); Cut Off C.o. Line; Transfer To Operator; Dialing-Out Mode Setting - C-Tel CPS-Z User Manual

1. This function must be in Operator Mode.
2. This programming only for C.O. line Incoming call. The extension which is not set ringing will ring under
Intercom Calling, Call Transfer.
3. This function is one way to set some extensions for not disturbed.
4. In Disable All status, the system will set all Exts. ringing automatically when the C.O. line comes in.

3.8 Auto-attendant Mode no Answer Process (except 108)

3.8.1 Cut off C.O. Line

Format: 160 #
Description: In auto-attendant mode, if the C.O. line doesn't dial the extension number over 5 seconds or more after
hearing the OGM, then the C.O. line will be cut off.
Default setting: The C.O. line will be cut off if no dialing.

3.8.2 Transfer to Operator

Format: 161 #
Description: In auto-attendant mode, if the C.O. line doesn't dial the extension number over 5 seconds or more after
hearing the OGM, then the C.O. line will be transferred to Operator.

3.9 Dialing-out Mode Setting

3.9.1 Set Indirect-Dialing-Out Mode for All Exts

Format: 21#:
Description: Indirect-Dialing-Out mode for all the Exts(dialing 9 for outgoing).

3.9.2 Set Indirect-Dialing-Out Mode for Certain Ext.

Format: 2N1#
13