Networking.basics; Check Your Ip Address - D-Link Mini 3G 21 Mbps User Manual

Appendix B - Networking Basics
Networking Basics

Check your IP address

After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless
router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK.
(Windows Vista users type cmd in the Start.Search box.)
® ™
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the default
gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security
settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters.
D-Link DWR-710 User Manual 51