Setting The Ip Address Through The Arp/Ping; Method - Avigilon ENC-4P-H264 Installation Manual

Setting the IP Address
Through the ARP/Ping Method
Complete the following steps to configure the encoder to use a
specific IP address:
1. Locate and copy down the MAC Address (MAC) listed on
the Serial Number Tag for reference.
2. Open a Command Prompt window and enter the following
commands:
a.
b.
3. Reboot the encoder.
4. Close the Command Prompt window when you see the
following message:
Reply from <New Encoder IP Address>: ...
12
arp -s <New Encoder IP Address>
<Encoder MAC Address>
For example: arp -s 192.168.1.10 00-18-
85-12-45-78
ping -l 123 -t <New Encoder IP
Address>
For example: ping -l 123 -t 192.168.1.10