Advertisement
Dismantling of the Power Board
1) Loosen 3 screws "E" as shown in gure 5.
2) Loosen 2 screws "F" as shown in gure 6.
3) Loosen 1 screw "G" as shown in gure 7 to remove the bracket.
4) Loosen 4 screws "H" as shown in gure 8.
5) With a pincers to nip this space as shown in gurer 9 and to take up the Power Board.
E
Figure 5
G
Figure 7
3 - 3
F
Figure 6
H
Figure 8
Figure 9
SERVICE POSITIONS
Service position A (Main Unit)
Service position B (Subwoofer)
Note:In some service positions the components or copper patterns of one board may risk touching its neighbouring pc boards or
metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
3 - 3
Advertisement
