Dismantling Instructions & Service Positions - Philips HTS6600/05/12 Service Manual

Dismantling Instructions & Service Positions
4. Mechanical Instructions
Notes: The position numbers used in the instructions refer to the exploded view drawings in Chapter 8.
Follow the Service Hints in Chapter 2 for dismantling the Main Unit, replacing the defective DVD mechanism and the Power Box Cable
Dressing.
4.1 Dismantling of the Main Unit
4.1.1 Dismantling of USB, HDMI, AV, AVIO (SCART), and IPOD
boards
1) Remove rear cover 170 and remove 2 screws to detach
the stand (161+162+163+164+165) as shown in Figure 1.
Figure 4-1
2) Remove 6 screws to detach Rear Cabinet 158 as shown
in Figure 2.
Figure 4-2
A
B
3139 785 32530
3) Remove 2 screws attached to the Bracket 146, and 1
screw attached to the AV plate 151 to remove the HDMI
Shield 154. Then remove 2 more screws attached to
the AV plate 151 to dismantle the HDMI board 1060.
Mounting screws for HDMI board are shown in fi gure 3.
C
Figure 4-3
4) Remove 2 screws to detach the USB board 1014 from the
Bracket 146 as shown in fi gure 4.
5) Remove 2 screws attached to the Bracket 146 and 3
more screws attached to the AV plate 151 to dismantle
the AV board 1020 as shown in fi gure 5.
D
Figure 4-4
4. EN 17