Table of Contents
Advertisement
L
Dismantling of the AUX Board
1) Loosen 2 screws "M" at the back panel to remove AUX Board as shown in fi gure 16.
Dismantling of the BD Board
1) Loosen 4 screws "N" on the top of BD board as shown in fi gure 17.
3 - 3
Figure 15
M
Figure 16
N
Figure 17
SERVICE POSITIONS
Note:In some service positions the components or copper patterns of one board may risk touching its neighbouring pc boards or
metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
3 - 3
Advertisement
Table of Contents
