Table of Contents
Advertisement
Dismantling of the DISP+LED+VOL&MP3 IN Board
1) Loosen 10 screws "E" on the top of DISP+LED+VOL&MP3 IN Board as shown in gure 8.
Dismantling of the Power Board
1) Loosen 4 screws "F" on the top of Power Board as shown in gure 9.
2) With a pincers to nip this space as shown in gurer 10 and to take up the power board.
F
Figure 9
Dismantling of the MAIN+SCART Board
1) Loosen 4 screws "G" on the top of Main Board as shown in gure 11.
2) Loosen 11 screws at the back panel as shown in gure 12.
3 - 2
E
Figure 8
Figure 10
G
Figure 11
H
Figure 12
SERVICE POSITIONS
Service position A
Note:In some service positions the components or copper patterns of one board may risk touching its neighbouring pc boards or
metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
3 - 2
Hide quick links:
Advertisement
Table of Contents
