First Lighting; Start-Up/Shutdown From The Control Panel; Note On First Ignition - MCZ EGO HYDRO Use And Maintenance Manual

4.8.
4.8.1.
The stove is ignited and shutdown by
After a start-up phase that lasts about 15 minutes, the stove will come
up to full operating power.
After the stove is shut down by pressing button B on the control panel,
the cooling-off procedure begins. This includes the interruption of fuel
loading, the cleaning of the grate and the continuation of ventilation
until the stove is sufficiently cold. This phase may last from 20 to 40
minutes depending on how long the stove was lit and its position.
4.8.2.
After repeated attempts at lighting, if there is no flame even though
pellets are flowing normally, check that the grate is correctly
positioned. It must be
abnormalities are found, it means that there may be a problem with the
stove components or that installation may not have been carried out
correctly.
. If after this check no
21.0°C 21.04
OFF
Mode:AUTO Menu
Temp:22°C Fan:A
Esc Set
< Setting >
Esc Set
< Setting >
Esc Esc Set Set
< < > >
Screw feeder loading Screw feeder loading
Esc ON Set
< >
Screw feeder loading
Screw feeder loading
B