Lennox Hearth Products Screen Face Kit Ravelle 42 Installation Instructions

instaLLatiOn instrUctiOns fOr instaLLinG screen
face kit fOr Use with the raVeLLe™ 42 Gas firePLace
kit cOntents (see Figure 1):
Please ensure that all these parts are included
1 ea. Screen Face [Complete] (A)
1 ea. Two Upper Brackets w/Screws (B)
1 ea. Two Lower Brackets w/Speed Nuts (C)
1 ea. Mounting Hardware (D)
- 6 ea. #10 Washers
- 6 ea. 10-24 Hex Nuts
- 4 ea. 10-24 Allen Head Screws
- 2 ea. 1/4" 20 Phillips Head Screws
1 ea. Instruction Sheet
cat. no. Model
75029 screen-42 screen face, Double Door, Black
a
Figure 1
- Kit Contents
nOte: DiaGraMs & iLLUstratiOns are nOt tO scaLe
775,289M
rev. a, 10/2008
Description
D
c
B
tOOLs neeDeD:
Phillips Head Screw Driver
3/8" Socket/nut Driver
5/32" Allen Wrench or T-Handle Wrench

GeneraL infOrMatiOn

If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installa-
tion.
all of these parts may scratch and bend, great care should be used
in handling them.
aLL warninGs anD PrecaUtiOns in the instaLLatiOn anD
OPeratiOn ManUaL PrOViDeD with the aPPLiance aPPLY tO
these instrUctiOns.
tUrn Off the firePLace anD aLLOw it tO cOMPLeteLY cOOL
BefOre PrOceeDinG.

instaLLatiOn instrUctiOns

step 1. Ensure the reveal corner is positioned as shown in Figure 1. If it
needs to be adjusted to the position shown in Figure 1, see Page
12 of the Installation and Operation Manual.
Reveal Corner
reveal corner
Reveal Corner Adjusted
for Arch Face
reveal corner
adjustment
for arch face
OnLY
wrOnG
Figure 2
HEARTH PRODUCTS
KITS AND ACCESSORIES
screen face kit
MODeL raVeLLe™ 42
expanded View of
reveal corner
TM
1