InSTALLATIOn InSTRUCTIOnS FOR InSTALLIng PILLAR
FACE KITS FOR USE wITh MODELS RAvEnnA™,
DESIgnER™ AnD RAvELLE™ 30 gAS APPLIAnCES
KIT COnTEnTS
Please ensure that all these parts are in one of the three boxes. The pillar
face comes packaged in three separate boxes. The following items are
included in each box:
Box 1 - Part # 75093
Cast door with glass installed
Box 2 - Part # 75092
4 ea. Ravelle 30 Mounting Brackets
2 ea. Designer and Ravenna Mounting Brackets
1 ea. Backing Plate With Cast Bottom Attached
8 ea. 5/32" Allen Head Screws
3 ea. Control Knob Extensions
1 ea. Cast Top
1 ea. Left Pillar
1 ea. Right Pillar
Box 3 - Ornate grills (upper and lower grills) - Part # 75091
or
Traditional grills (upper and lower grills) - Part # 75094
Note: The brackets to attach the pillar face assembly to the appliance are
included in the second box. Discard the unused brackets upon completion
of the pillar face assembly.
Pillar Cast Face Kits*
37-5/8" w x 23-3/4" h
Model
Cat. no.
75093
PILCST-gLASS
75092
PILCST-PILRS2
75094
PILCST-gRL-TRD3
75091
PILCST-gRL-FIL3
* Revenna and Designer ONLY - The pillar cast face kits also requires the
use of the surround kits listed below (sold separately - See reference
information on Page 6). The surround kit must be installed prior to
the installation of the pillar cast face kit.
Revenna and Designer Cast Surround Kits
Cat. no.
Model
75156
RDv-DBv-PCFP3044-TOP,
75157
RDv-DBv-PCFP3044-SIDES
Description
glass Door (Box 1 of 3)
Back, Pillars, Top (Box 2 of 3)
Traditional Bar grills (Box 3 of 3) OR
Ornate Filigree grills (Box 3 of 3)
(ref. form # 775,292M)
Description
30 x 44 Top (Box 1 of 2)
30 x 44 Sides (Box 2 of 2)
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.
P/n 775258M
Rev. A, 10/2010
MODELS RAvEnnA™, DESIgnER™ AnD RAvELLE™ 30
Shown with Traditional Bar Grills
*The cast surround kits are not for use with the Ravelle 30 fireplace.
Figure 1A
Figure 1B
TOOLS nEEDED
Phillips Screwdriver
5/32" Allen Wrench or T-Handle Wrench
gEnERAL InFORMATIOn
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL wARnIngS AnD PRECAUTIOnS In ThE InSTALLATIOn AnD
OPERATIOn MAnUAL PROvIDED wITh ThE APPLIAnCE APPLY TO
ThESE InSTRUCTIOnS.
HEARTH PRODUCTS
KITS AND ACCESSORIES
PILLAR FACE KITS
Cast Surround *
Pillared Face
Traditional Bar grill (75094)
Ornate Filigree grill (75091)
1