Panasonic SA-AK770PL Service Manual page 66

SA-AK770PL / SA-AK770GCP
Step 4 Cut 2 tie wraps.
Step 5 Remove 1 screw at the rear panel.
Step 6 Move the rear panel slightly backward as arrow shown,
lift up the AC Inlet P.C.B. together with the SMPS P.C.B..
Step 7 Position SMPS P.C.B. & AC Inlet P.C.B. according to
the diagram shown.
Step 8 Position Mechanism Unit (CR14C) according to the
diagram shown.
Step 9 Connect 22P FFC cable at the connector (CN2801) on
Main P.C.B..
Step 10 Connect 11P FFC cable at the connector (CN2802) on
Main P.C.B..
Step 11 Connect 6P FFC cable at connector (CN2815) at Main
P.C.B..
Step 12 Connect 20P FFC cable at connector (CN2804) at
Main P.C.B..
Step 13 Connect 5P wire cable at the connector (CN1113) on
USB Connector/Led P.C.B..
66