Panasonic SA-AK770PL Service Manual page 64

SA-AK770PL / SA-AK770GCP
Step 9 Remove 3 screws from D-Amp P.C.B..
Step 10 Lift up D-Amp P.C.B. as arrow shown.
Step 11 Remove 1 screw at Fan Unit detach to the chassis
support.
Step 12 Connnect 2P wire cable at the connector (CN2820) at
Main P.C.B..
Step 13 Position Mechanism Unit CR14C according to the
diagram shown.
Step 14 Connect 22P FFC cable at the connector (CN2801) on
Main P.C.B..
Step 15 Connect 11P FFC cable at the connector (CN2802) on
Main P.C.B..
Step 16 Connect 6P FFC cable at connector (CN2815) at Main
P.C.B..
Step 17 Connect 20P FFC cable at connector (CN2804) at
Main P.C.B..
Step 18 Connect 5P wire cable at connector (CN1113) at USB
Connector/Led P.C.B..
64