Indication Tone; Care And Maintenance - i-onik BTH-002 User Manual

Blue LED quickly blinks three times
every 2 seconds
Blue LED gradually turns on and off
red LED blinks twice every
20 seconds
LED INDICATOr
Two tones every 3 seconds
Three "DU" tones every 20 seconds
40
Set up HFp and A2Dp connection
Conversation mode
Low power

INDICATION TONE

STATUS HEADSET
Conversation mode and
microphone mute
Low power

CArE AND MAINTENANCE

Please read the following suggestions carefully, that will help you to fulfill
any warranty obligations and to enjoy this product for many years.
- Keep dry and don't put it in the dump place, in case of effecting the interior
circuit of product.
- Don't put the product under sunlight or place it in hot areas. High
temperatures will short the life of electronic devices, destroy the battery,
or distort certain plastic.
- Don't expose the product in the cold areas. It may damage the internal
circuit board.
- Don't try to take apart the product. It may damage the product if you are
not professional.
- Neither let the product fall off on the floor nor knock it on hard substances.
It may damage interior circuit.
- Don't use intensify chemical or detergent to clean the product.
- Don't scrap the surface with sharp things.
In case the product doesn't function properly, send it to the store you bought
it. The staff will help you to solve the problem.
41