Charging The Headset - i-onik BTH-002 User Manual

First time charging
Before you use this Bluetooth headset, please charge the battery of i.onik
BTH-002 fully.
Next time
When you hear three warning tones of "DONG" every 20 seconds, at the same
time, the red light blinks two times. It means the battery is low power and need
to be charged. There are two types of charging as below:
A. Charging the battery with travel charger
Step 1: Plug the travel charger into standard AC power outlet.
Step 2: Connect the travel charger with the charging port of the headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3-4 hours to charge the headset fully.
B. Charging the battery with USB cable
Step 1: Insert USB charging cable into USB port of PC.
Step 2: Connect charging cable with the charging port of headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3-4 hours to charge the headset fully.
Note: Choosing travel charger or USB cable depends on different countries or areas and actual
demands.
28

CHArGING THE HEADSET

®
Warning:
1) The battery is recycled.
2) Do not dispose of the battery in fire, as it may cause explosion.
SWITCH ON/OFF HEADSET
FUNCTION OpErATION
Switch on press the MFB
button for 3-5
seconds, and
release it till the
blue LED is on
Switch off press the MFB
button for 3-5
seconds, and
release it till the
red LED is on
Note: In order to save power, the headset will automatically switch off if no devices can be
connected within 5 minutes after switching on.
LED-INDICATOr INDICATION
TONE
Blue LED is on A long "DI" tone
for 1 second
red LED is on A long "DI" tone
for 1 second
29