Pairing The Headset With Bluetooth Transmitter; Multi-Pair - i-onik BTH-002 User Manual

pAIrING THE HEADSET WITH BLUETOOTH TrANSMITTEr

You can enjoy music wirelessly through connecting headset with stereo
Bluetooth transmitter. Here take BTT001 (single sale) iPod general Bluetooth
transmitter for example. Pairing steps as follows:
1) Keep the Bluetooth transmitter and headset in the range of 1 meter when
pairing.
2) Make the headset enter into pairing mode (refer to "How to enter into
pairing mode").
3) Turn on the Bluetooth transmitter. It will search Bluetooth device automa-
tically and starts pairing.
4) When the headset requests PIN No, the Bluetooth transmitter needs to
respond "0000" automatically.
5) After successful pairing and connecting, the blue LED of headset quickly
blinks twice every 4 seconds.
Notes:
1) The pairing password of i.onik ® BTH-002 is "0000", so, the headset can't pair with the
Bluetooth transmitter which pairing password is not "0000".
2) If the pairing is still not successful after trying several times, please refer to your
Bluetooth transmitter manual carefully.
32

MULTI-pAIr

The headset can connect with two devices at most. One is the mobile phone
with HFP profile, another is the devices with A2DP profiles. If you want to
finish the pairing of several Bluetooth devices, please refer to the following
steps:
1) Firstly, pair the headset with Bluetooth transmitter (refer to "pairing
headset with Bluetooth transmitter").
2) Switch off the Bluetooth transmitter.
3) Pair and connect the headset with the Bluetooth mobile phone (refer to
"pairing headset with Bluetooth mobile phone").
4) Restart Bluetooth transmitter, it will connect with headset automatically.
Notes:
- After successful pairing with several Bluetooth devices, the paired devices will remember
each other. Unless pairing information is deleted because of new pairing, otherwise
make mobile phone and headset set up hands free connection next time, and re-start the
Bluetooth transmitter, then the connection of several devices can be performed.
- For the mobile phone which supports the HSP and A2DP at the same time. It may set up
connection with HSP and A2DP simultaneously. At this time, start Bluetooth transmitter
may not connect with the headset again.
33