Playing Music; Restoring Factory Defaults And Resetting; Led Indicator - i-onik BTH-002 User Manual

When the headset connects with the mobile phone or Bluetooth transmitter
which supports A2DP, you can enjoy music through headset wirelessly.
FUNCTION STATUS HEADSET
Volume up

playing music

Volume down playing music
pause playing music
play pausing
Last song playing music
Next song playing music
Notes:
- For some mobile phones, when they are playing music, the music will transmit to the
speaker of mobile phone, you have to choose "transmit the sound through Bluetooth" in
the "setting" of music play interface, and then choose "BTH-002" in the device list, the
music will be transmitted to the headset. Please refer to the instruction of your mobile
phone for further information.
- When the volume of headset is adjusted to max. or min, you will hear a indication tone.
- Remote control the function of last song/next song/pause/revert, it needs your mobile
phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your
mobile phone or Bluetooth transmitter for further information.
38
pLAYING MUSIC
OpErATION
Short or long press + key
Short or long press - key
Short press MFB
Short press MFB
Short press < key
Short press> key
rESTOrING TO FACTOrY DEFAULTS AND rESETTING
Make sure the headset is off, press and hold MFB and + buttons simultane-
ously for about 8 seconds, release them when you hear two "DU" tones and
see red LED is on, now the headset restores to factory defaults, and the pairing
information will be deleted.
Charge the headset to make it reset.

LED INDICATOr

LED INDICATOr
red LED is on
red LED is off
LED INDICATOr
red and blue LEDs blink alternately
Blue LED quickly blinks once every
2 seconds.
Blue LED quickly blinks twice
every 4 seconds
STATUS HEADSET
Charging
Finish charging
STATUS HEADSET
pairing mode
Not connected to a device
Set up HFp or A2Dp connection
39