Ready To Fly; 3D Roll; Special Functions - SYMA X5SC User Manual And Manual

READY TO FLY YOUR QUADCOPTER
Step 1: Turn ON the
transmitter

SPECIAL FUNCTIONS

3D Roll

Once you are familiar with the basics and have
mastered hovering you will be able
to perform an exciting ariel stunt.
Ensure you are hovering more
than 3 meters from the ground
and in a clear area.
Once hovering press
the 3D Roll switch on the Top
Right hand side of the transmitter,
then push the right rudder
(in any direction)
to make the X5SC Roll.
Step 2: Open the battery
cover & insert the battery
into the power port.
Step 4:
Push the throttle lever to the highest position,
and then pull it back to the lowest position.
There will be one clear sound from the transmitter,
this shows that the quadcopter has entered into
the pre-flight state.
TIP:
When syncing your quadcopter keep
it in a horizontal position.
Horizontal
position
-7-
Step 3: Close the battery
cover and turn on the
quadcopter.