Quadcopter Battery Charging; Controller Modes - SYMA X5SC User Manual And Manual

QUADCOPTER BATTERY CHARGING

1 -
Ensure the Quadcopter is switched
OFF then remove the battery cover.
3 - Connect the battery to the USB
charger making sure the connection
is tight.
5 - Re insert the battery pack. Reconnect
the battery plug and replace the
battery cover.
Charging time: about 75 minutes — Flying time: about 7-10 minutes
When charging, please ensure the battery is placed on a hard non flammable surface
When charging, please remove the batteries from the quadcopter.
The charging process should be supervised by an adult.
Allow the battery to cool in between charges.
Only use the supplied USB charger to charge the battery.
Do not cut or modify the battery wires.
Do not puncture or Pierce the battery pack.

CONTROLLER MODES

The transmitter has 2 built-in modes, Mode 1 & Mode 2, in
line with different customer's usage pattern. Keep pushing
button B to right, than turn on the transmitter power to
change Mode 1 or Mode 2.
缺产品
1
2 - Remove the battery plug from the
battery port. Then slide battery pack
out of the model
3
4 - Insert the USB cable into the USB
port of the computer
The indicator on USB cable will glow
during charging, than it will go OFF
when battery fully charged.
5
-4-
2
4