Programming Bar Codes - Datalogic QuickScan Lite QW2100 Quick Reference Manual

Programming Bar Codes

Programming Bar Codes
For your convenience, this guide includes the programming bar
codes required to configure the reader for use with different in-
terface (terminal/host) types.
See the Product Reference Guide (PRG) for more complete in-
formation about programming and configurable features. You
can download the latest version of the PRG and any other avail-
able publications for the reader from the website listed on the
back cover of this manual.
Resetting the Standard Product Defaults
If you aren't sure what programming options are in your reader,
or you've changed some options and want the factory settings
restored, scan the Factory Default Settings bar code below. This
will copy the factory configuration for the currently active in-
terface to the current configuration.
Host Interfaces
Quick Reference Guide
Factory Default Settings
Cables may vary depending upon sys-
tem configuration.
Some interfaces require the reader to
NOTE
start in the disabled state when pow-
ered on. If additional reader configura-
tion is desired while in this state, pull
the trigger and hold it for five seconds.
The reader will change to a state that
allows programming with bar codes.
27