Page 1
Press Snap ™ Manual 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Press Snap ™ Visit us at www.TestEquipmentDepot.com Soil Pipe Cutter WARNING! Read this Operator’s Manual carefully before using this tool. Failure to understand and follow the contents of...
Press Snap™ Soil Pipe Cutter Table of Contents Safety Symbols................................1 General Safety Rules Work Area Safety................................1 Personal Safety ................................1 Service ..................................1 Specific Safety Information Press Snap Cutter Safety ............................2 Description, Specifications And Standard Equipment Description ..................................2 Specifications................................2 Pre-Operation Inspection/Maintenance ........................3 Tool Set-Up and Operation ............................3...
Press Snap™ Soil Pipe Cutter Safety Symbols In this operator’s manual and on the product, safety symbols and signal words are used to communicate important safe- ty information. This section is provided to improve understanding of these signal words and symbols.
CT400, 320-E, RP 330-B and RP 330-C. • Keep others out of work area while cutting. Stand The Press Snap cutter is limited in cutting range by the clear of the pipe. Cutting can cause pieces of pipe to fixed force available from the press tool.
6. Adjust the Press Snap cutter for the size of soil pipe to be cut. The size adjustment has two positions . The position closest to the press tool is used for 1.5", 2"...
Page 6
Figure 2 – Size Adjustment Figure 3B – Not Fully Retracted 7. Insert the Press Snap cutter into the press tool and power as directed in the press tool operator’s manual. 10. Choose a spot from which to operate the cutter.
• Some thicker walled pipe may require several cycles of the Press Snap cutter to cut. In these cases repeat the cut with the chain in the same position as the first cycle.