SD CodeFree User Instruction Manual page 43

SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
8) The blood will be drawn into the strip
automatically. If beeper is turned on,
meter will beep to let you know the test is
beginning.
9) When blood is applied to the strip, the
display counts down from 5 to 1 second and
your result appears on the display in just 5
seconds.
10) The blood glucose result is displayed in mg/
dL or mmol/L.
11) When the test is done, pull out the used test
strip. The meter shuts off automatically in 5
seconds after you remove the test strip.
•
•
NOTE
•
42
Dispose the used test strip as per
your local guidelines.
Remove the inserted lancet from
the lancing device and dispose
the used lancet according to local
guidelines.
Always use fresh capillary whole
blood on meter tests.