SD CodeFree User Instruction Manual page 14

SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
1) Strip Stand-by Display
After turning on the meter, the below will be
displayed automatically to show the test strip
icon flashing. In this Strip Stand-by Display,
it's able to enter setting mode of the meter or
search the test results.
2) Blood Stand-by Display
If a test strip is inserted into the meter in either
Strip Stand-by Display or turning off, the below
will be displayed automatically to show the
appropriate test result after applying blood
sample. And if you pull off the test strip, it will
return to Strip Stand-by Display. In this Blood
Stand-by Display, the ON/OFF button doesn't
act. But if you need to check the meter or the
test strip, you may use a control solution. Then
the control solution icon in the left-side of test
strip icon will be displayed by pressing left
button during 3 seconds.
13