E-FLITE Eratix 3D 25e Assembly Manual page 21

2. Measure from the stab tip to the wing tip. Adjust the

stab until the measurements are equal.
A
3. View the airframe from the rear and make sure the

wing and stab are parallel. If not, lightly sand the stab
saddle until they are.
E-flite Eratix 3D 25e ARF Assembly Manual
A
A=A
Wing and stabilizer
parallel
4. Double-check the adjustments from Steps 1 through 3.

Use a felt-tipped pen to trace the outline of the fuselage
onto the top and bottom of the stabilizer.
21