Bracket (Slider) - Sony XTL-W7000 Service Manual

XTL-W7000

3-5. BRACKET (SLIDER)

1 two screws
(M2)
A
2 Open the bracket (slider)
in the direction of arrow A .
B
monitor block
3 Rotate the worm gear in the direction of arrow B .
for pulling the monitor block.
Note: Don't touch except the gray portion of worm gear.
5 bracket (slider)
4 two convex portions
RS board
Note: Never remove RS Board as the position of gear
has been adjusted in the production.
14