Honda NT700V Owner's Manual page 288

Washing the motorcycle
1. Rinse the motorcycle thoroughly with
cool water to remove loose dirt.
2. Clean the motorcycle with a sponge or
soft cloth using cool water.
Avoid directing water to muffler outlets
and electrical parts.
3. Clean the fairing, headlight lens and
other plastic parts using a cloth or
sponge dampened with a solution of
mild detergent and water. Rub the
soiled area gently rinsing it frequently
with fresh water.
The rear grab rail is also a plastic part
and can be cleaned in the same manner
as described above.
Take care to keep brake fluid or
chemical solvents off the motorcycle.
They will damage the plastic and
painted surfaces.
128
The inside of the headlight lens may be
clouded immediately after washing the
motorcycle. Moisture condensation inside
the headlight lens will disappear gradually
by lighting the headlight in high beam. Run
the engine while keeping the headlight on.
4. After cleaning, rinse the motorcycle
thoroughly with plenty of clean water.
Strong detergent residue can corrode
alloy parts.
5. Dry the motorcycle, start the engine,
and let it run for several minutes.
6. Test the brakes before riding the
motorcycle. Several applications may
be necessary to restore normal braking
performance.
Braking efficiency may be temporarily
impaired immediately after washing the
motorcycle.
Anticipate longer stopping distance to
avoid a possible accident.
E