Display - Miele PT 5135 C OS Operating And Installation Instructions

Display

The following are shown in the display:
– Programme selection
– Programme duration and the
programme start and end time
When a programme is selected, the
display is used to select:
– the drying level (e.g. Hand iron,
Normal...)
– delay start
The Settings J menu is also operated
via the display.
-/+ buttons
For altering the values shown in the
display:
- decreases the value or moves the
highlighting upwards
+ increases the value or moves the
highlighting downwards
OK button
For confirming the value selected and
choosing the next element.
m button
For selecting delay start.
You can also press this button during a
drying programme to check the
estimated programme end time or the
current time of day.
Operating the tumble dryer
Estimated time remaining
When a programme is selected, the
estimated duration (time remaining) will
appear in the display. Please be aware
that it is only an estimate!
The following factors all affect the
estimated time remaining: Residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the machine and adjust
the estimated time remaining for a more
accurate reading. Because of this, the
time displayed can alter during the
course of a programme.
In the same way, the Woollens
handcare and Smoothing programmes
can finish earlier than expected if a
certain temperature is reached. This
can happen with particularly fine
fabrics or if items were partly dry
beforehand.
11