Troubleshooting; Problems Indicated By Messages On The Lcd Panel Or Status Lights; Problems And Solution - Epson Network Interface Unit User Manual

Network Interface Unit User's Guide

Troubleshooting

Problems Indicated by Messages on the LCD Panel or
Status Lights
You can check the status of the scanner and the Network Interface Unit from messages on the LCD panel and the status
lights.
Clear the error according to the message displayed.
The following table explains the light patterns and the main statuses.
Ready Light Error Light
On Off
Off On
Off Off
Blink Off
Blink Blink
If the following messages are displayed, turn off the scanner and then turn it back on again. Also, check the network
connection and settings.
If this does not correct the problem, see the scanner User's Guide or consult your dealer.
❏ Network error
❏ Network fatal error
❏ Scanner error
❏ No reply received

Problems and Solution

This section provides solutions to problems you may have.
Refer to the "Troubleshooting" section in the user's guide of the scanner if you have problems with the software. The
online help also provides versatile tips and other information helpful for problem-solving.
Troubleshooting
Scanning can be performed.
The scanner is in sleep mode.
The scanner has not been recognized.
A network related error has occurred.
An error such as a paper jam has occurred in the scanner.
A job is being cancelled.
The PC/server on the network has not been recognized.
Scanning.
Searching for or connecting to a network.
The firmware is being updated.
20
Status