Ipv6 Firewall - D-Link DIR-860L User Manual

Section 3 - Configuration
The DIR-860L's IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device. The DIR-860L's IPv6
Firewall functions in a similar way to the IP Filters feature.
Enable IPv6 Simple
Check the box to enable the IPv6 firewall simple security.
Security:
Configure IPv6
Select an action from the drop-down menu.
Firewall:
Name:
Enter a name to identify the IPv6 firewall rule.
Schedule:
Use the drop-down menu to select the time schedule that the IPv6
Firewall Rule will be enabled on. The schedule may be set to Always,
which will allow the particular service to always be enabled. You can
create your own times in the Tools > Schedules section.
Source:
Use the Source drop-down menu to specify the interface that connects
to the source IPv6 addresses of the firewall rule.
IP Address Range: Enter the source IPv6 address range in the adjacent IP Address Range
field.
Destination:
Use the Destination drop-down menu to specify the interface that
connects to the destination IP addresses of the firewall rule.
Protocol: Select the protocol of the firewall port (All, TCP, UDP, or ICMP).
Port Range:
Enter the first port of the range that will be used for the firewall rule
in the first box and enter the last port in the field in the second box.
D-Link DIR-860L User Manual

IPv6 Firewall

87