L2Tp - D-Link DIR-860L User Manual

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol ) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option
is typically used for DSL services.
My Internet Select L2TP.(Username/Password) from the drop-down menu.
Connection:
Enable Advanced Advanced Domain Name System (DNS) services enhances your Internet
DNS Service: performance by getting you the information and web pages you are
looking for faster and more reliably. In addition, it improves your overall
Internet experience by correcting many common typing mistakes
automatically, taking you where you intended to go and saving you
valuable time.
Disclaimer: D-Link makes no guarantee as to the availability, reliability,
functionality and operation of the Advanced DNS service or its features.
Enable True Check to enable true Gigabit routing. This will increase the throughput of
Gigabit Routing the WAN-LAN connectivity of the router.
Connectivity:
Address Mode: Select Static if your ISP assigned you an IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
PPTP IP Address: Enter the IP address (Static PPTP only).
PPTP Subnet Mask: Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).
PPTP Gateway:
Enter the Gateway IP Address provided by your ISP.
PPTP Server IP: Enter the Server IP provided by your ISP (optional).
Username: Enter your PPTP username.
D-Link DIR-860L User Manual

L2TP

32