Camera Search - D-Link mydlink DNR-312L User Manual

Section 4 - Configuration
The Camera Search function lets you automatically add cameras to the
NVR. You can then view camera information and preview the camera's
feed. To add cameras follow the steps below.
Step 1: Click Search to search for network cameras. The system will list
all the available cameras at this moment. Click the + icon to add a
camera to your camera list. If the cameras are already added, it will
be marked in red.
Step 2: After clicking the icon, the camera setting page will pop up. Click
on the camera that you want to add.
Step 3: Enter the camera name, user name, and password of the camera.
Notes
• Some cameras will limit the login authority to the
administrator only.
• To add cameras without the UPnP function, please go to
the camera Setup menu and enter the IP address manually.
• You may not be able to see all the cameras on your first
search. It may take a moment for the devices to respond to
the UPnP request. Please click Search again if the cameras
are not immediately displayed.
Step 4: Click Add to add the selected camera.
Step 5: After clicking Add, the updated information will be displayed in
the camera list. Repeat steps 2 through 5 to add other cameras to
your list.
D-Link DNR-312L User Manual

Camera Search

62