D-Link mydlink DNR-312L User Manual page 55

Section 4 - Configuration
Set Recording Schedule Configuration
1. Select one of the cameras from the list and click on Add/Edit
Schedule.
2. Choose a recording mode, the available options are Continuous
Recording, Record on event, and Record on motion.
3. Enter the desired Start time and End time, and choose a day of the
week that the recording function will be active.
4. Press the OK button to save the new schedule.
Note:
• When configuring the Motion Detection event, be sure to
set up the motion detection function on your camera first.
• After changing the motion detection settings of your
camera, be sure to disconnect the camera from the NVR
and then re-connect it to update all new changes.
• Alternatively, you can drag the time bar to change the
recording period. The red bar represents the Continuous
Recording feature and the blue bar represents the Record
on motion feature.
D-Link DNR-312L User Manual 51