User Account - D-Link mydlink DNR-312L User Manual

Section 4 - Configuration
User Account enables you to create user accounts to access your NAS device and set
user privileges for them.
Adding a New User
Follow the steps to manage existing user accounts and give new users access to the
NVR. Management options include adding and deleting users, and allowing access
rights to users. You can also change admin and user passwords.
Step 1: Input the new user name.
Step 2: Input the password. Type the password again to confirm.
Step 3: Select the live view cameras and PTZ/ IO Control functions which this user can
access.
Step 4: Select the playback channels and Backup Data function which this user can
access.
Step 5: Click Finish to create a new user.
The Administrator account can configure all functions of the NVR. This account cannot
be deleted. The default password for admin is blank. Setting a password after the first
login is strongly recommended. If the administrator password is lost, you may hold the
reset button on the rear panel of the device to reset the NVR to factory defaults.
Note: Resetting the device will erase all previously saved settings.
D-Link DNR-312L User Manual

User Account

57