Kubota M108S Operator's Manual page 83

C Defrosting or demisting
To defrost or demist the windshield, take the following
steps.
1. Set the mode switch to the
2. Open the front air outlet, door air outlet and direct it to
the windshield.
3. Set the recirculation / fresh air selection lever to the
"FRESH AIR" position.
4. Set the blower switch and the temperature control dial
to the "3" and max "WARM" (end of clockwise)
positions, respectively.
(1) Mode switch
(2) Temperature control dial
(1) Door air outlet
position.
(A) "WARM"
(A) "OPEN"
(B) "SHUT"
A If you set the temperature control dial to "COOL" side
position at position, cool air will come out from the
face air outlets.
CAB OPERATION 63