Kubota M108S Operator's Manual page 34

14 OPERATING THE ENGINE
2. Make sure the fuel cock is in the
"OPEN" position.
(1) Fuel cock
3. Place the shift levers in "NEUTRAL"
position.
(1) Hydraulic-shuttle shift lever
(2) Main gear shift lever
(A) "CLOSE"
(B) "OPEN"
(N) "NEUTRAL POSITION"
4. Place the PTO clutch control lever in
"OFF" position and hydraulic control
levers in "LOWEST" position.
(1) PTO clutch control lever
(2) Position control lever
(3) Draft control lever
5. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever
(2) Foot throttle
"ON" "OFF"
(A) "DOWN"
"INCREASE"
"DECREASE"