62
CAB OPERATION
C Cooling or dehumidifying-heating
1. Set the mode switch to the
2. Set the recirculation / fresh air selection lever to the
"FRESH AIR" position. To fall the temperature in the
CAB quickly, set this lever to the "RECIRCULATION"
position.
3. Press and turn on the air-conditioner switch with
indicator.
4. Turn on the blower (1/2/3) switch.
5. Adjust the temperature control dial to the "COOL" or
an intermediate position to achieve a comfortable
temperature level.
A In summer when the heater is not used, keep the
temperature control dial at the max "COOL" (end of
counterclockwise) position. Otherwise, hot air will
raise the temperature in the CAB.
(1) Mode switch
(2) Temperature control dial
(3) Blower switch
(4) Air conditioner switch with indicator light
or
position.
(A) "WARM"
(B) "COOL"
C Foot warming and head cooling
1. Set the mode switch to the
2. In the cooling or dehumidifying-heating mode, set the
temperature control dial at the center position area.
3. Open the front air outlet and the door air outlet direct it
to your feet.
4. You can feel your head cool and your feet warm.
(1) Temperature control dial
position.
(A) Center position area