Microdot User Manual page 21

Check that the code number on the
screen and the code number printed
on the vial are the same. If they are
not the same, code the meter,
following instructions on page 7.
After the code number appears, the
drop of blood symbol will appear and
begin to flash. It is now time to apply
the blood sample.
STEP 2
Apply Sample.
Obtain a rounded drop of blood by
using the adjustable lancet on your
finger. The blood sample must be at
least 0.6microliter (600 nanoliters)
in volume to get an accurate test
result. Touch and hold the blood drop
to the TOP EDGE of the test strip
until blood has completely filled the
"test zone".
17