Before Testing; Check The Display; Code The Meter - Microdot User Manual

Before Testing

Check the Display.

When a strip is inserted into the meter, the
meter performs a system check. You will see
all the display segments appear for 2
seconds. When the system check is
completed, the strip code number (example
82) will appear.
The code number on the display has to match with the code
number on the vial of test strips! If the code number displayed
on the meter does not match the number printed on the vial, the
test results may be inaccurate.
STEP 1
Enter the Code Mode.
Insert a test strip to turn on the meter. All the
segments of the display will appear. Next the
code number will be displayed until a sample
is applied or the meter is turned off.
6