Microdot User Manual page 11

STEP 2
Match the Code Numbers.
Compare the code number
on the display with the code
number shown on the vial
label. If the code number on the meter display
matches the code number on the vial, you may begin
testing.
STEP 3
Code the Meter.
If no number appears or the code
number does not match the code on
your vial, change the code number
by pressing and holding the C button
on the meter until CODE starts to
flash. You can increase or decrease
the number by pressing the M or C
button until the displayed number matches the number
on the test strip vial. The code will be accepted if no
button is pressed and the strip is not removed for 3
seconds.
Do they
match?
7