Features - Mitsubishi Electric PCH-2GKHA Service Manual

1

FEATURES

Series PCH
Indoor unit
Service Ref.
PCH-2GKHA
PCH-2.5GKHA
PCH-3GKHA
PCH-4GKHSA
PCH-5GKHSA
PCH-6GKHSA
1. ADVANCED REMOTE CONTROLLER
Operation buttons
This switches between
continuous operation and the
timer operation.
button
Press this button to switch
the cooler electronic dry
(dehumidify) automatic and
heater modes.
TEMP button
This sets the room
temparature The temparature
setting can be performed in
1°C units
Setting range
Cooler 19°C to 30°C
Heater 17°C to 28°C
This model name of the
remote controller is indicated.
Ceiling Suspended
Cooling capacity/Heating capacity
5,400 / 6,200 (7,600)
1
7,000 / 7,100 (9,200)
1
7,500 / 8,500 (10,600)
1
10,000 / 10,450 (13,150)
1
12,400 /13,900 (16,900)
1
14,500 / 15,000 (18,000)
1
w Rating Conditions (JIS B 8616)
Cooling : Indoor : 27: (80
Outdoor : 35: (95
Heating : Indoor : 20: (68
Outdoor : 7: (45
button
This sets or switches the
current time. start time and
stop time.
4
This switches the horizontal
fan motion ON and OFF.
(This button dose not operate in
this model)
W
18,400 / 21,200 (25,900)
23,900 / 24,200 (31,400)
25,600 / 29,000 (36,200)
34,100 / 35,700 (44,900)
42,300 / 47,400 (57,700)
49,500 / 51,200 (61,400)
o o
F)DB, 19: (66 F)WB.
o o
F)DB, 24: (75 F)WB.
o
F)DB.
o o
F)DB, 6:(43 F)WB.
Once the operation of the unit is set, subsequent operation can
only be performed by pressing the ON/OFF button repeatedly.
button
FILTER
CHECK MODE
TEST RUN
button
FILTER
CHECK MODE
TEST RUN
Remote controller
Btu/h
button
This sets the ventilation fan
speed.
ON/OFF button
This switches between the
operation and stop modes
each time it is pressed. The
lamp on this butoon lights
during operation.
button
This adjusts the vertical angle
of the ventilation.
FILTER button
This resets the filter service
indication display.
CHECK-TEST RUN button
Only press this button to
perform an inspection check
or test operation. Do not use
it for normal operation.
3