This indicates when the unit is
controlled by optional features such
as central control type remote
This indicates when the continous
operation and time operation modes
It also display the time for the timer
operation at the same time as when
it is set.
OPERATION MODE display
This indicates the operation mode.
This indicates when the standby
mode is set from the time the sleep
operation starts until the heating air
This indicates when the defrost
operation is performed.
This indicates when a malfunction
has occurred in the unit which should
display lights when the unit is stopped and power supplied to the unit.
When power is turned ON for the first time the (CENTRAL CTRL) display appears to go off momentarily but this is not a
When the central control remote control unit, which is sold separately, is used the ON-OFF button,
TEMP button do not operate.
"NOT AVAILABLE" is displayed when the
fan direction adjustment function and the louver function.
The current time , start time and stop
time can be displayed in tensecond
intervals by pressing the time switch
button. The start time or stop time is
always displayed during the timer
This displays the selected setting
button are pressed.This indicates that this room unit is not equipped with the
This displays the air direction.
This lamp lights when electricity is
supplied to the unit.
The selected fan speed is displayed.
The temperature of the suction air is
displayed during operation. The
display range is 8° to 39°C. The
display flashes 8°C when the actual
temperature is less than 8° and
flashes 39°C when the actual
temperature is greater than 39°C.
This lamp lights during operation,
goes off when the unit stops and
flashes when a malfunction occurs.
This display lights in the check mode
or when a test operation is
This lamp lights when the filter need
to be cleaned.