Step 2: Insert The Batteries Into The Remote; Step 3: Preset The Channels Automatically - Sony Trinitron KV-PF21 Operating Instructions Manual

Notes
• If you connect a stereo VCR, connect the yellow plug to
jack) and the white plug to
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
CAUTION
Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 9).
Note (KV-PF21M70/PF21M40/PF14M70/PF14M40)
• During automatic channel presetting, your TV screen will indicate "B/G",
"I", "D/K" or "M" for the TV system.
Now You Are Ready. . .
To watch your TV, see page 11.
(the black jack).
1
2
(the yellow
1
VHF LOW B/G
Using Your New TV
1
5