Step 2 : Insert The Batteries Into The Remote; Step 3 : Preset The Channels Automatically - Sony Trinitron KV-XA21 Operating Instructions Manual

Notes
• With the "VIDEO MULTI SYSTEM" input terminal, you can also receive
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
• When no signal is input to the connected video equipment, the TV screen
CAUTION
• Do not connect the power cord until you have completed making all other
• To avoid battery leakage and damage to the remote, remove the batteries
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
VIDEO 2 INPUT
VIDEO L ( MONO ) AUDIO R SELECT AUTO VIDEO INPUT
PROGR
3
AUTO
PROGR
Tips
• If you want to stop automatic channel presetting, press SELECT.
• If your TV has preset an unwanted channel or cannot preset a particular
• The AUTO PROGRAM button on the remote works as the AUTO
PAL, NTSC and SECAM video signals when using VIDEO IN 1 jacks at
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
becomes blue.
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
1
2
POWER
STANDBY/
STEREO/
WAKE UP
VOLUME CHANNEL
1
AUTO PROGRAM
channel, then preset your TV manually (see page 10).
PROGR button on the TV.
POWER
PIC MODE
SLEEP
AUTO ADD/
CABLE PROGRAM ERASE
CABLE: ON
2 3
1
Using Your New TV
5