Sony Trinitron KV-PF21 Operating Instructions Manual page 10

Presetting channels (continued)
To change the TV system setting
(KV-PF21M70/PF21M40/PF14M70/PF14M40 only)
If the picture or sound is abnormal when receiving programs through the 8 (antenna)
terminal
(1) Press SELECT until "TV SYS" appears.
(2) Press + or – to select the appropriate
TV system until the picture or sound
quality is optimal.
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
2
Press SELECT until "MANUAL PROGRAM" appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until "MANUAL PROGRAM" appears on the screen.
(3) Press + or – on the remote control once.
(4) Press to display "FINE" on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to return to normal screen.
10
Using Your New TV
skip program numbers.
TV SYS: B/G
B/G
I
2
+/– on the TV to preset channels and
D/K M