Step 2: Insert The Batteries Into The Remote; Step 3: Preset The Channels Automatically - Sony Trinitron KV-XG29 Operating Instructions Manual

Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
• Do not connect video equipment to the ... 2 (video input) jacks at the
• When no signal is input to the connected video equipment, the TV screen
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
PROGR
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
Note (KV-XG29M80/XG29M50 only)
• During automatic channel presetting, your TV screen will indicate "B/G" ,
jack) and the black plug to -L (MONO) (the white jack).
output from the VCR to the program number 0 on the TV.
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
becomes blue.
1
2
AUTO
PROGR
channel, then preset your TV manually (see page 9).
"I", "D/K" or "M" for the TV system.
1
VHF LOW AUTO
Using Your New TV
(the yellow
1
5