Reading The Led Status - Datamax APEX 3 User Manual

1.3 Reading the LED Status

Table 1 explains the LED indicator status. Refer to
<ON/OFF> and <FEED> push button switches and AC adapter socket.
location of the status LEDs on the front of the printer.
LED
LED # 1
Communication
LED # 2
Battery
LED # 3
Magnetic Card
Reader
&
Printer Error
Note: Refer to the troubleshooting guide to determine error or fault condition.
FIGURE 4: LED STATUS
Table 1 - Reading the LED Status
Status Condition
Flashing
GREEN
Steady
Flashing
BLUE
Steady
Flashing
AMBER
Steady
RED Steady
AMBER Steady
Steady
GREEN
Steady
RED
Flashing
Figure 1 for the locations described for
Function
Power is ON and the printer is in RS232 or IrDA mode.
Communicating with host.
Power is ON and the printer is in Bluetooth mode.
Transmitting/receiving
Power is ON and the printer is in 802.11b/g mode.
Transmitting/Receiving
Low power indication.
Battery being charged. The LED will turn off when the
battery is fully charged.
 Indicates that MCR is ready to accept data.
 Indicates that SCR is ready to accept data.
 Printer Error. The printer is out-of-paper or Paper
door is open.
 MCR/SCR faulty condition.
Indicates the print head is hot and printing is paused.
5
Figure 4 provides the