Setting The Display Format; Setting The Time - Lathem 1500E User Manual

SETTING THE DISPLAY FORMAT

SETTING THE TIME

It is recommended that during initial installation you manually set the time and date. The
1500E will automatically correct itself when it receives a radio signal from the atomic clock.
Example: Change the time from 10:08 to 10:09.
Hour
Second
TIME
SELECT CHANGE
TIME
SELECT CHANGE
TIME
SELECT CHANGE
MO TU WE TH
Minute
S
Press the SELECT button and position
the " " mark at the "TIME".
At that moment, the "Hour" flashes. (The
flashing means it can be changed.)
SET
Change the "Hour".
In case of the example, press the SET
button because the hour is not to be
changed.
At that moment, the flashing changes
SET from "Hour" to "Minute".
S
Change the "Minute".
Press the CHANGE button to set at "09",
and then press the SET button.
At that moment, the "Second" starts to
SET
run from "00".
S
FR SA SU
After you finish setting the time, press
the SET button once again.
Now
completed. Replace the cover and lock.
IMPORTANT: If you do not complete
Step 3, the clock will not print.
1
tep
2
tep
3
tep
the time setting has been
7
9