Table of Contents
Advertisement
...
10. Operating faults
...can sometimes be rectified by the user.
Check the possible causes indicated here and eliminate them accordingly.
If you are unable to determine the cause, contact a Winterhalter service technician.
Do not open any coverings or machine parts for which the use of a tool is required.
Fault
Machine cannot be switched on.
Machine is not filling up.
Tank supply pipe filling the machine continuously.
Washed items are still dirty.
Washed items are still wet.
Indicator lamps in programme keys (3) and (4) are
flashing.
Indicator lamps in programme keys (3) and (4) are
flashing and indicator lamp in switch (5) is
constantly illuminated.
8
WARNING
• On-site main switch is not turned on.
• Internal cause: contact the responsible after-sales
service.
• On-site main shut-off valve is not open.
• Dirt trap in supply water pipe is blocked.
• Standpipe not correctly inserted.
• Detergent dosing omitted or interrupted due to empty
container.
• Pump intake strainer blocked.
• Items not loaded correctly in the machine.
• Wash nozzles in wash arms blocked.
• Setpoint temperatures not reached.
• Rinse aid supply interrupted due to empty container.
• Setpoint temperatures not reached.
• Wash cycle was interrupted as the setpoint temperature
was not reached in the boiler after 15 minutes. Switch the
machine off and on again. If the keys are still flashing, the
problem is due to a machine-internal cause, and you
should contact the responsible after-sales service.
• The 15-minute time limit for the continuous circulation
cycle was exceeded. Press switch (5), then turn the
machine off and on again.
Winterhalter Gastronom GmbH
Postfach 1152
D-88070 Meckenbeuren
Possible cause
89000825
10/98 sch
Hide quick links:
Advertisement
Table of Contents
